Skip to main content

PLEASE NOTE: We are using Covid-19 social distancing protocols at both our retail locations. We appreciate your patience.

Filter By:

  • Show More Brands

  • Show Fewer Brands

Forks

Sunlite Lightweight Threaded Fork (Chromoly)
$69.99
• Cantilever brake mounts • 45mm rake • Chromoly construction • 1-inch steerer diameter • 200mm steerer length • Threaded fork
Sunlite Lightweight Threaded Fork (Steel)
$28.00 - $36.19
- Brake mounts: Caliper - Construction: Hi-tensile steel - Rake: 50mm - Type: LW - Steerer type: Threaded - Race diameter: 27mm - Axle: 3/8'inch
Sunlite Threaded Steel MTB Fork (26-inch)
$44.99 - $79.99
• Cantilever brake mounts • High-tensile steel construction • Threaded fork • Steerer diameter: 1-inch • Steerer length: 200mm • For bikes with 26-inch wheels
RockShox Fork Service Kit
$17.00 - $40.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Judy Gold RL
$349.00 - $379.00
Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring
RockShox Recon Silver RL
$254.00 - $349.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
RockShox Revelation RC
$649.00
Revelation has grown, and after representing the original long travel forks, it’s ready to tackle the most demanding trail and enduro rides. The chassis is directly derived from Pike, with 35mm Fast Black upper tubes for unmatched stiffness and to match the aggressive look of modern trail and enduro bikes. Damping is handled by our proven Motion Control with a specific tune to match Charger’s feeling, with travel options up to 160mm for 27.5" and 150mm for 29". The DebonAir air spring reduces friction from every single moving part, maintaining traction in more conditions than ever before. - NEW "E-MTB" decal for Diffusion Black options - Chassis derived from Pike - Motion Control damping featuring low-speed compression adjustment to firm - 35mm Fast Black upper tubes - DebonAir air spring reduces friction from every single moving part, improving bump absorption and response under load, and drastically reducing rider fatigue
MSW 1-Inch Threaded 700c Road Fork
$89.99
Dimension Road Forks are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Weight: 692g - Wheel Size: 700c
MSW Threadless 700c Road Fork
$89.99
Dimension Road Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing. - Forged dropouts with eyelets, welded unicrown construction - Designed for short-reach caliper brakes - 25 x 14mm tapered oval blades - Axle to Crown Length: 374mm - Brake Mount (Fork): Short Reach Caliper (39mm-49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 - Steerer Type: Straight - Weight: 773g (1-inch); 780g (1 1/8-inch) - Wheel Size: 700c
Fox Racing Shox 36 E-Optimized Factory Series GRIP2 29-inch
$1,099.00 - $1,149.99
The undisputed all-mountain champion. The legendary 36 is no stranger to accolades, winning awards, accolades, and EWS races with equal panache. 36 offers an unmatchable combination of performance, tunability, and light weight to ensure the winning ways continue, everywhere from big backcountry routes to the EWS circuit. "Factory" says it all—feature-packed and designed to exceed the demands of our Factory-level riders. What we sell is what they race. Factory Series products feature slippery smooth, ultra-durable Genuine Kashima Coat. 36 E-Bike Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis
Dimension 1-Inch Threaded 700c Cyclocross/Hybrid Fork
$79.99 - $89.99
700c Hybrid fork with Cantilever Mounts - Forged dropouts with eyelets, straight-gauge oval-tapered blades - Dimension Forks are intended for general recreational riding only; they are not intended for aggressive riding, stunt riding or road racing - Welded unicrown construction - Axle to Crown Length: 403mm - Brake Mount (Fork): Canti Studs - Color: Black - Crown Race: 26 - Front Axle: 10mm x 100mm - Material: Steel - Offset: 50mm - S.H.I.S. Stem Clamp Diameter: 25.4-24 tpi Quill - Steerer Tube Length (mm): 170 - Steerer Type: Straight - Wheel Size: 700c
No Image
$425.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors. - 100 x 12mm thru-axle - 1-1/8 – 1.5" tapered steerer - 45mm offset
Whisky Parts Co. No.7 Road (Quick Release)
$350.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
Whisky Parts Co. No.9 CX Flat Mount Fork
$525.00
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug
Whisky Parts Co. No.9 Carbon Mountain Fork 29-inch
$525.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky Parts Co. No.9 MCX Fork
$565.00
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders. - 12 x 100mm thru-axle - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700c x 51mm or 650b x 61 mm max tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru axle and Whisky Parts Co. compression plug
Whisky Parts Co. No.9 MTN Boost ST 29-inch Fork
$525.00
A thoughtful complement to the Whisky No. 9 MTN Boost LT Fork, this short-travel offering is just the piece for transforming hardtail racers into fully rigid cross-country champs. Lightweight carbon construction, a tapered steerer, and thru-axle dropouts promise dependable strength and steering. - Lighter and stiffer than a suspension fork, the MTN Boost ST Fork is long enough to replace forks with 110–120mm of travel - 485mm axle to crown - Boost 110mm spacing with clearance for 29 x 3.0” or 27.5 x 3.0” tires - Room for up to 180mm rotor - Whisky No.9 Thru Bolt and compression plug included
Whisky Parts Co. No.9 Mountain Fork
$565.00
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Whisky Parts Co. No.9 RD+ Flat Mount
$525.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
Whisky Parts Co. No.9 Road Flat Mount Disc Fork
$525.00
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
WeThePeople Battleship Fork
$164.99
WeThePeople's Battleship Fork is strong and technical with super thick investment cast dropouts that are designed to be the perfect partner for WTP's most popular frame. - Super short 24mm offset street fork - Invest cast dropouts and fork end, designed to work flawlessly with plastic pegs and hub guards - Incredibly strong design - 7075-T6 alloy top bolt, M24 thread - Tapered, triple butted fork blades - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing
Surly Cross-Check Fork
$130.00
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
Surly Disc Trucker Thru-Axle Fork
$175.00
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
Surly ECR Fork
$130.00
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Surly Ice Cream Truck 150 Fork
$185.00
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
Surly Krampus 110 Fork
$185.00
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Surly Krampus Fork
$130.00
Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut
Surly Long Haul Trucker Fork (26-inch)
$130.00
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
Surly Midnight Special 650b Fork
$185.00
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Surly Midnight Special Fork
$175.00
This beaut here was designed alongside our Midnight Special Frame. In an effort to shed a few grams (it's for a road bike after all), we opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice—don't you think? Now, we don't throw the phrase "future-proof" around lightly, so we won't use it here either. What we will say is that, like the Midnight Special Frame, this fork is equipped with modern road standards like flat mount disc brakes and a 100mm x 12mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - Axle-to-crown: 400mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 27.5" x 2.32" or 700c x 42mm (27.5 x 1.95" or 700c x 38mm w/fenders) - Weight: 1254g
Page 1 of 4 Next page