Brakes/Levers/Pads
$14.99
Genuine replacement parts
Get back on the bike with fresh brake pads for optimal operation and safety.
Replacement brake pads for Zoom brakes used on specific Trek and Fisher mountain bikes.
- Replacement disc brake pads for Zoom HL-280 calipers
- HL-280 Zoom calipers came stock on Trek 3500 Disc, X-Caliber, and other models
$19.99
TRP Disc Brake Pads - Semi-Metallic, Steel Backed, For Hylex, Hylex RS, and HD-T190 Flat-Mount Calipers
$26.99
Full sintered metallic replacement pads for flat mount Hylex RS brakes.
- Full metallic compound for maximum performance and power
- Fits Hylex RS brakes
- Color: TRP Copper
- Sold per wheel
$74.99
TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only.
When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions.
- Six slots to remove water, mud, and debris
- Two-piece design for heat management and stiffness
$69.99 - $74.99
TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.
$19.99
• Side pull caliper design
• Includes levers, calipers, cable and housing
• Steel construction
• 780g set
$48.99
Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation.
- BL-MT200 hydraulic disc brake lever
- BR-MT200 hydraulic disc brake caliper
- Rotor sold separately
$10.99
Shimano Altus BR-CT91 cantilever brakes offer confident and reliable braking at a convenient price point.
- Brake Lever Actuation: Short Pull
- Brake Mount Type: Canti Studs
- Material: Aluminum
- Pad Attachment Style: Threaded Post
- Weight: 204g
$30.99
Shimano BR-M375 Mechanical Disc Brake Caliper
- Pad adjust tool size unified to 5mm allen key
- Quick/fast assembly
- Light braking operation for easy/long riding
- Clean cable routing in combination with both chain stay and seat stay mount
- Brake power same as BR-M416A
- 20% pad clearance increase
- Cable actuated
- Single 74mm caliper
- For use with Linear-pull MTB levers
- B01S Resin Pads
- Rotor not included
- Frame or fork mount adapter and rotor not included
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
$33.99
Shimano's DXR V-Brake Levers are the choice of the pros, from the Olympics to the local race scene. They use a 2-finger design with Shimano's proven Super Linear Response system that gives you great power and feel with little effort.
$144.99
Shimano Deore hydraulic disc brakes are a solid setup, offering reliable power and rigid brake design for all riding styles, from XC to trail. The BL-MT500 brake levers deliver high-powered Servo Wave performance for rapid initial pad contact, along with I-spec II compatibility. These are paired with powerful 4-piston MT520 calipers that help boost rider confidence and enjoyment.
- Highly responsive braking power for greater control and modulation
- Sleek and durable master cylinder design
- 4-piston calipers provide a wider pad contact area
- Heat insulated pads and pistons
$29.99
The Shimano BL-M6100 hydraulic disc brake lever provides powerful and responsive braking for a wide range of riding styles.
$44.99 - $51.99
Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design.
- Compatible with both resin and metal pads
- Includes external type rotor lockring
$22.99
Shimano M03 Metal Disc Brake Pads
- OEM pad for XT BR-M755 caliper
- Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability
$21.00
Shimano G04S metal disc brake pads.
- Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers
- Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability
- Ventilated steel backing plate for improved heat dispersion
- Backing Plate Material: Steel
- Compound: Metal
$60.99 - $67.99
Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design.
- Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade
- Quick and easy installation with spline mount and lock ring (included)
- Compatible with metal and resin pads
$79.99
With a low-profile Flat Mount design, the Shimano GRX BR-RX810 hydraulic disc brakes provide greater control for mixed-terrain riding.
- Excellent heat dissipation
- Flat mount and anti-mud specification
- Convenient tool access
- Simple wheel replacement
- Easy and clean bleeding system
- Simple set up and maintenance
$36.00
- Pair of J-Type disc brake pads with fins, for 1 caliper
- Available with resin or metallic compound
- Fits 2-piston SLX and XT calipers from 10 to 12 speed groups and 10 or 11 speed XTR brakes
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than G-type pads
- Interchangeable with F-Type and G-Type pads
- Includes spring and pin
$37.99
- Pair of L-Type brake pads with fins, for one caliper
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade, especially in long descents
- Choice of compound: Resin, for improved modulation & lower noise, or Metallic, for improved durability & higher braking power in muddy conditions
- Longer lasting than K-Type pads
- Interchangeable with K-type finless pads
- Fits all Shimano flat mount gravel & road disc calipers, including Dura Ace BR-R9170, Ultegra BR-R8070, 105 BR-R7070, GRX BR-RX810 and BR-RX400
- NOT compatible with XTR BR-M9100
$11.00
Shimano's R600/6403 are comfortable and plush road bike replacement brake lever hoods.
$35.99
- 3-layer structure with aluminum core and two stainless steel outer layers reduces rotor surface temperature approximately 100 degrees Celsius compared to all-steel rotors
-Requires external-type rotor lockring when installing onto 15/20mm axle hub
-Aluminum spider
-Includes standard type rotor lockring
$51.99
SLX SM-RT70 Center Lock rotors deliver powerful and consistent braking performance in all riding conditions. They feature a 3-layer structure (an aluminum core paired with two stainless steel outer layers) that reduces rotor surface temperatures approximately 100 degrees Celsius compared to all-steel rotors.
- Aluminum spider
- Includes standard type rotor lockring
- Requires external-type rotor lockring when installing onto 15/20mm hubs (sold separately)
$33.99 - $46.99
6-Bolt disc brake rotor
- Easy to install anti-loosen plates help secure disc brake rotor bolts in place
- Resin/Metal pad compatible
- Size: 160, 180, 203, 220mm
$69.99 - $76.99
Shimano RT-EM810 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. The Ice Tech Freeza design significantly reduces heat build-up in the system to ensure consistent, high-performance braking even on the steepest downhill stretches. Shimano's Center Lock mounting system makes installing and removing rotors quick and easy thanks to the spline mount and lock ring design.
- For use with E-Bike Speed Sensor systems
- Recommended Brake kit: M9120/M8120/M7120
$84.99
In the pursuit of pure downhill speed, there's only one brake to choose: Shimano's Saint Hydraulic Brake Levers. Short pivot Servo-Wave Levers provide excellent pad clearance, faster pad engagement, and 20% more braking power than previous designs. And, free stroke adjustment lets you dial in lever travel for customized brake performance. Single-finger levers feature incredible ergonomics and a dimpled surface for sure grip on your next descent. Tool-free reach adjustment fits these levers to your hands and riding style, so total control will never be far from your hands. These levers are I-Spec compatible so you can keep handlebar clutter to a minimum.
$74.99
Shimano Saint/XTR RT99 Centerlock Disc Rotors
- Freeza technology, 3-layer structure with aluminum core and stainless steel outer layers and additional aluminum cooling fins reduces rotor surface temperature approximately 150 degrees Celsius compared to all-steel rotors
- Aluminum spider
- Includes standard type rotor lockring
- Requires external-type rotor lockring when installing onto 15/20mm axle hub
- Hub/Disc Compatibility: Center-Lock Disc
- Weight: 95 g
- Rotor Size (mm): 140 mm
- Rotor Type: Two Piece
- Pad Compatibility: All Pad Compounds
$64.99
Shimano Tiagra BR-4770 hydraulic disc brake calipers offer greater rider control in all conditions. With convenient One Way Bleeding and easy hose joint system, installation and adjustment are simple.
$73.99
Shimano's Ultegra Brake Calipers feature lightweight, stiff, cold-forged aluminum arms and a symmetrical dual-pivot design with twin bearings for smooth, easy operation with modulation and power to spare. Direct Mount design integrates the brakes with the frame for improved aerodynamics and increased braking power. Pair them with Shimano's Ultegra polymer-coated brake cable and scrubbing speed feels almost effortless. Setup is fast and simple with cartridge brake pads equipped with conical washers.
$64.00 - $128.00
As a front lever for your Rival 1 set-up, or paired for single speed adventures, the new Rival brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. SRAM Reach Adjust feature brings near universal fit for riders.
- Weight: 260 grams per lever (no cables)
- Lever Material: Aluminum
- Finish: Black
- Adjustment: Reach Adjust
Page 1 of 4
Next page