$174.99 - $204.99
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
Syntace's HiFlex full carbon seatpost is centered around a highly technical carbon design that evenly distributes rider load as well as damps vibrations without loss of control. Its extra-deep 52mm bottom clamp offers optimal rail support while a shallow 30mm top clamp allows for extra fore-aft adjustment. The two-bolt micro adjust clamp offers precise saddle angle adjustments and features bolts arranged in line with the direction of bump forces for increased strength Ideal for anything from road to mountain. - Improved vibration damping and directional stability - Bob-damping mechanism for full suspension bikes - Compatible with most Carbon rails - Weight: 212g - Max. Height: 310mm - Min. Height: 40mm
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
- Chrome - Sold individually
• Aluminum • Coil spring suspension • Adjustable pre-load design • Collar adjustment for play removal • 7/8-inch seat-clamp diameter
$9.99 - $17.99
• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter
$17.00 - $22.99
• Unicycle-specific seatpost
Sunday's Pivotal Seatpost uses a traditional straight-up pivotal design. It looks good in black, keeps your seat where you want it, and takes a beating — everything you need in a seatpost.
Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.
The Hive BMX Seat/Post Combo is the largest-size Hive pattern seat paired to a 150mm Thermalite Pivotal seatpost. It's a straightforward approach to a dialed setup. - Vegan leather "Hive" pattern top - Anti-slip side panel gives the saddle ultimate grip and wear life
The Tuner pivotal post features a 220mm length with grooves evenly spaced every 15mm for cut lines or seat height indication. - 6061 alloy forged post - Weight: 4.6oz - Clamp Style: Pivotal
- Retro-looking aero seatpost for road bikes - Aluminum, body with a single bolt head
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head
The Salsa Guide Carbon Seatpost is lightweight, durable, and supportive when you need it most. - Carbon shaft - Bonded Aluminum two-bolt head
The Salsa Guide Deluxe Seatpost is premium aluminum: lightweight, strong, and drama-free. Count on it to be there when you need it. - 2014 Aluminum shaft - Two-bolt head
Salsa's Regulator Ti Seatpost delivers the maximum comfort and performance of titanium, along with the convenience of independent adjustment of saddle angle and fore/aft positioning. This post is built for the long haul with specifically designed, stainless steel bolts, as well as CNC'd aluminum head internals and saddle clamps to provide the ultimate in strength and durability. - 3/2.5 titanium with a brushed finish - Length: 410mm - Proprietary head design allows independent saddle angle and fore/aft positioning - Small, lightweight head design uses CNC-machined AL-6061 internals with stainless steel threaded stud to prevent thread stripping - CNC-machined AL-7075 saddle clamps - Specially designed, stainless steel bolts provide ultimate strength and durability *NOTE: Not for use with carbon seat rails or ovalized seat rails
- Alloy mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position (no-offset clamp) - I-Beam single rail clamp post specific to I-Beam saddles
- Carbon fiber mast with micro clamp aluminum head - One bolt adjusts tilt and fore-aft saddle position for micro tuning which allows for superior comfort and performance (no-offset clamp) - Unsurpassed strength to weight ratio - Specific to I-Beam saddle
Our intention with Reverb AXS was inventive and pure: No hoses. No routing. No energy wasted. Not a single thing in the way of the experience. We created a reliable wireless-electronic dropper post and controller that actuates with drastically less effort and zero distraction. Expanding what's possible on a bike, Reverb AXS is enabled by SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Effortless Electronic-Wireless actuation and infinite height adjustment with a single touch. - Clean, simple and fast to install. No hoses to route, no fishing required. - Updated internals for faster return speed in all conditions. - New Vent Valve Technology, a simple and reliable built in service solution without disassembly of the seatpost. - SRAM AXS technology, a new level of interaction, personalization, and connectivity across all AXS-enabled components. - Includes RockShox AXS handlebar controller, rechargeable SRAM battery, and charger.
$399.00 - $475.99
The RockShox Reverb 1x remote pairs the ergonomics of SRAM’s shifter design and low-lever-force hydraulic actuation to the internally routed Reverb Stealth B1 so riders can use their Reverb posts quicker, more easily and often, for better ride control on the trail. Reverb's 1x Remote’s Bleeding Edge fitting makes bleeding quick and simple, with an updated fluid path and bleed porting to make it easier to push fluid through the system, and a dedicated bleed adapter that plugs into the bleed port and seals the system to minimize air contamination and fluid loss - Adjustable return speed by turning the collar on the remote - MatchMaker X or discrete clamp options included - 2000mm hose length - Adjustment: Infinite - Remote Position: Left
Ritchey's Classic Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Ritchey's "Classic" hi-polish silver finish - Two-bolt design for easy to adjust, vise-like grip - Low profile clamp reduces stress on lightweight rails and won't bottom out - Bolts oriented to the axis of the rails for greatest contact area with the saddle - 3D Forged 2014 - Available in 27.2, 30.9 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Hi-polish silver finish - 245g (27.2/350mm)
Proven 2-bolt design provides a class-leading balance between strength, weight, and easy adjustability. Low-profile clamp reduces stress on lightweight rails and won't bottom out. - 3D Forged 6061 alloy - Length: 400mm - 25mm offset - 43x38mm cradle - 250g (27.2/300)
Ritchey's Comp Carbon Seatpost uses a proven 2-bolt design that provides a class-leading balance between strength, weight, and adjustability. - Low profile clamp won't bottom out on saddle - Bolts are oriented to the axis of the rails for greatest contact area with saddle - Wide saddle clamp reduces stress on lightweight saddle rails - Works with a wide range of saddle rail dimensions - Press bonded carbon/6061 alloy - Available in 27.2 and 31.6mm diameters - Length: 350mm - 25mm offset - 43x38mm cradle - Matte UD carbon finish - 229g (27.2/350mm)
Ritchey's Comp Link reimagines the two-bolt post, making it lighter, more compliant, and more versatile than ever. The patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo rails. - 6061 aluminum 2-piece press-fit construction - Diameters: 27.2 and 31.6mm - Offset: 20mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Length: 400mm - 284g (27.2x400mm)
Ritchey's Superlogic Carbon LINK reinvents the two-bolt seatpost, making it lighter, more compliant, and more versatile than ever. - Patented LINK clamp works with all standard saddle rail designs as well as Ritchey Vector Evo and Selle Italia MonoLink saddles with separate adapter - LINK Carbon Posts use FlexLogic carbon layup developed for ProTour team bikes from Stevens, Canyon and Scott – 15% more vertically compliant with no loss of lateral or torsional stiffness - 15mm of offset and a reversible clamp which allows for an additional 10mm of fore-aft saddle adjustment - Monocoque Carbon Construction - Diameters: 27.2, 30.9, 31.6mm - Offset: 15mm - Reversible clamp allows for an additional 10mm of fore-aft saddle adjustment - Lengths: 350, 400mm - Matte UD carbon finish - 145g (27.2x350)
Ritchey's beautiful Superlogic Carbon Seatpost is made of high modulus monocoque carbon for ultra low weight and impressive vibration damping without sacrificing strength. Ritchey's single bolt clamp uses precision forged aluminum hardware, which cuts weight even further! And, the single bolt clamp makes installation and adjustment a breeze, too.
Ritchey's one-bolt Superlogic Carbon is one of the lightest, toughest seatpost designs in the world. - Patented SideBinder clamp design uses a single 5mm bolt for quick, secure adjustment - Precision forged alloy clamp assembly for strength - Low-profile head for optimal saddle clearance and sleek lines - Wide saddle clamp reduces stress on lightweight saddle rails - Interchangeable clamps provide compatibiliy for all popular rail sizes - Carbon Monocoque Construction - Available in 27.2, 30.9 & 31.6mm diameters - Available in 350 & 400mm lengths - 25mm Offset - 7x7mm saddle rail clamp included - Saddle Clamp Torque Spec: 12Nm - 148g (27.2/300)
Replacement WCS Seat Mast Topper for compatible Ritchey seatposts. - For frames with integrated seat mast, different offset heads for tuning cockpit setup - Seat rail clamps not included, use in conjunction with Ritchey WCS Seat Mast 1-bolt rail clamp set, 7 x 7mm (MPN #55055467006) - SideBinder 1-bolt fore/aft and tilt adjustable - 3D forged alloy body and head with one-bolt pinch clamp - 110g
Ritchey's WCS 1-Bolt Seatmast Topper makes saddle installation and adjustment super easy. It's constructed of forged aluminum for strength and the single bolt clamp makes it very simple to find your perfect saddle position. Furthering the ideal fit, the WCS Seatmast Topper comes in 50mm and 70mm lengths and different offsets.
$92.99 - $125.99
Sleek design and ultimate functionality of the WCS 1-Bolt seatpost are the hallmarks of Ritchey design. Single bolt-actuated side load clamp offers easy adjustability and simple security in a post that works as nicely as it looks. - 3D Forged 7050 Alloy - Available in 27.2, 30.9 and 31.6mm diameters - Available in 350 and 400mm lengths - 20mm Offset - 7x7mm saddle rail clamp included - Interchangeable clamps available for carbon rail saddles - Saddle Clamp Torque Spec: 12Nm - Finish: Blatte - 195g (27.2/350)