Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands
$14.99 - $19.99
Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Bontrager XXX Integrated bar/stem, as seen on the Emonda SLR 10 - Add any XXX accessory mount (sold seperately) for an elegant, integrated look
- Install this in line to your shift housing for precise tension adjustments - Compatible with all 4mm shift housing - Allows for 3.5mm of adjustability - Indexed movement prevents any accidental or unintentional adjustments - Compact design only adds 14mm to housing length
Key features: - Cable actuated remote lever for the Bontrager Drop Line dropper seatpost - Also compatible with most other cable-actuated dropper seatposts - Under Bar Lever is designed to ergonomically replace the left shifter on 1x drivetrains - Universal Lever is compatible with 1x, 2x, 3x drivetrains and left or right hand placement - Use with: Drop Line Seatpost
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included. - Adjustable length fits bikes with 24-29" wheels - Attaches to the rear of the bike near intersection of seatstay and chainstay - Includes mounting hardware
Bontrager's Speed Concept Seatpost Cap lets you get your position dialed for your next triathlon or time trial. Two different saddle offsets and widely a adjustable saddle angle means you'll find the perfect fit for your race against the clock.
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Not compatible with the V3 Power Unit - Required for external mounting of V2 Power Unit
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
$20.00 - $21.99
Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.
$20.99 - $21.99
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - Fits external seat post diameters from 30.9 - 31.6mm - Not compatible with the V2 Power Unit
$21.99 - $65.99
Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Will not damage frame finishes - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin
EPS Power Unit Mounts are required for mounting the Power Unit to the bicycle and are available in both seatpost mount and waterbottle mount. - For mounting the V3 power inside the seat tube using the water bottle screws - Not compatible with the V2 Power Unit
EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Allows for the mounting of the EPS Power Unit beneath the bottom bracket - Only compatible with Chorus and Athena EPS systems
$71.99 - $106.99
EPS cable guide magnets are required for internally routing EPS wires. - Includes: wire, metal cable, and magnet
- Required for use on carbon frames with carbon front derailleur braze on mounts - Compatible with all Campagnolo EPS front derailleurs - Increases the stiffness of carbon front derailleur braze-on mounts to handle the increase torque of EPS front derailleurs
EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Allows for the mounting of the EPS Power Unit beneath the saddle - Only compatible with Chorus and Athena EPS systems
- EPS under-seat shifter cable kit
In conjunction with the EPS Power Unit, the Interface is the "thinking" center of EPS and is responsible for on board diagnostics, managing settings, converting analog signal from Ergo Levers to digital and sending it on to the Power Unit maintaining a dialogue with the Power Unit. - Weathertight, o-ring sealed connectors - Waterproof to 1m for 30 minutes (IP67 Rated) - Compatible only with the Chorus Power Unit
Campagnolo's Record EPS V2 Interface Unit is like a translator, the vital piece of the electronic shifting puzzle. Mounted to the brake cable or the handlebar, it processes the data churned out by the EPS Power Unit (sold separately) and communicates it to you via an easy-to-read colored LED. Plus, it plays the critical role of converting every analog shift you send its way into a digital format so the system can work as a cohesive whole. There's also an easy-to-read LED battery gauge so you know when it's time to recharge the system. And don't mind the weather, as it's totally waterproof.
The EPS Power Unit is the brain of the entire EPS system. The power unit input/output gate charges the battery and updates the firmware. The unit checks and manages the battery pack, interacts with the interface, drives the front and rear derailleurs, and displays system anomalies through an acoustic buzzer and RGD light. EPS V2 Power Units are for internal battery applications, under bottom bracket, or under chain stay mounting options and require the specific EPS V2 Interface. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1 meter for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F
The EPS Power Unit is the systems source of power as well as the "brain" of the system, responsible for managing the battery pack, enabling and monitoring the front and rear derailleurs and communicating with the Interface Unit. - Weathertight, o-ring sealed connectors - Lithium Ion battery duration: 500km/month - 1500km, 1000km/month - 1800km, 2000km/month - 2000km - Water proof to 1m for 30 minutes (IP67 Rated) - Operational temperature: -4F to 140F - Charging temperature: 32F to 113F - 17mm diameter for easy seat post installation - Battery charges through the Interface Unit - Compatible only with the Super Record/Record V3 Power Unit
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
- Enables Double Barrel springs (1.43" ID x 2.10-2.19 OD) to be run on other brand shocks
Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included - Stack height: 9mm
Allows the lower of a 47mm IS headtube to be converted to use a standard 41mm 36x45 degree headset bearing.
Replacement elastomers for Thudbuster ST suspension seatposts allow the rider to tune for weight.
$19.50 - $28.99
Mounting hardware fits a variety of Cane Creek shocks.