Tools

- Stiff nylon bristles and perfect size for blasting through dirt caught on wheels and cassettes

• 12” Tungsten steel hacksaw blade specially designed to smoothly cut carbon composite handlebars, forks, seat masts, seat posts, etc. • Fits Park Tool SAW-1 Hacksaw and most 12” hacksaws • The CSB-1 is designed for use with the SG-8 Saw Guide. NOTE: Similar to a grinding stone, do not use this blade on aluminum

Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post

Rear Shock Air Valve Adapter (for charging IFP) - SIDLuxe A1+ (2020+)

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

Wheels Manufacturing Over Axle Adapters are used for pressing your most commonly used bearing sizes into place. Each represents an excellent addition to the Press-4 Bearing Press. - Adapters sold individually

Park Tool's Replacement Chain Tool Pin fits Park Tool's CT-6, CT-6.2, and CT-6.3 Chain Tools (each sold separately). • Made from hardened alloy tool steel • NOTE: The 985-1 will also push out the chain rivet completely from the chain side plate.

Park's Bladed Spoke Holder is a must for building and truing wheels that feature bladed spokes. It has 4 different size slots to fit a wide variety of bladed (aero) spokes from .08 to 2mm wide. It holds them safely in place to prevent twisting as you turn the nipple to true and tension the wheel.

Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut

Park's Offset Brake Wrench utilizes a unique design that allows it to reach into tight areas that other wrenches cannot. The OBW-3 features a 14mm wrench on one end and the other end fits into a brake's tension springs to rotate the brake around its bolt for proper alignment. The OBW-4 features 10-, 11-, 12-, and 13-mm opening to fit most models of sidepull brakes.

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

Park Tool is world-renowned for their bicycle industry tools, and their pumps are no exception. Keep yours up to speed and working smoothly with these rebuild kits. - 1096K: Contains one #1081 head as well as one #1075 plunger gasket for older PFP-2 and first generation PFP-4 floor pumps. Also compatible with second-generation PFP-4 floor pumps. - 1096X: Contains one #1096R head, one #1472 fitting, and one #1075 plunger gasket for second generation PFP-4 floor pumps. Also compatible with PFP-2 and first-generation PFP-4 floor pumps. - 1096Z: Contains one #1096R head, one #1472 fitting, and one #1087 plunger gasket for PFP-5 and PFP-7 floor pumps. Also compatible with PFP-3, PFP-6, and PFP-8 floor pumps.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 23mm size fits Shimano 15mm through-axle hubs. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. This 24mm wrench fits Shimano 15mm through-axle front hubs and many suspension-fork top caps. Some applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

It's a spoon! It's a fork! Park's Stainless-Steel Spork is a take-along culinary multi-tool made from high-quality, rustproof stainless steel with a comfortable vinyl-coated handle. Who said nutrition has to come from energy bars? Pack your favorite eats and Park's Spork for enjoying on-the-ride snacks and mid-repair munchies in style! The Spork has a hole for carrying it on a keychain or hanging it on your workbench.

Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced Box-Section Design is the key to our faster, safer, easy-to-use tool. Remove tires in seconds! Prestalever is Quicker and Speedier than anything you've ever used. Our Patent-Pending Rim Hook with Honeycomb reinforced box-section is the key to our faster, safer, easy-to-use tool. As you scoop the tire bead with the Prestalever, the slot underneath we call the "rim hook" naturally drops inside the rim. It prevents the Prestalever from slipping out, so you don't drop the bead. The rim hook stops the Prestalever at an easy-to-hold angle on the side of the rim. Then you simply glide the lever around the rim, and the tire peels-off as you go. The Prestlever is made of slippery Nylon, greatly reducing the force needed to remove tires. When you're done, twist the Prestalever 90 degrees to raise the rim hook out of the rim. Our box-section design allows the twist-action to easily stop at 90 degrees so the lever slides out easily. Install tires without strain. Our thick tip on the tire installer-end prevents catching and pinching tubes inside your tire. The bead-grabbing edge gives the right balance between leverage and lifting force, making it as easy as possible to complete tire installation. Presta Core tool is now essential. Even Bicycle Presta tubes now include removable cores. This gives you the added option of using tire sealant inside the tube of your standard tire. Removable cores are not always fully tightened at the factory. A loose core could cause slow leaks, or could even become unscrewed while using inflation devices. Tubes should be checked during installation and regularly afterwards for Presta core tightness. Don't carry an extra tool for chains! The Prestalever quick-link breaker is an effective emergency tool if you need to remove your chain on the road. The Patented design is the creation of Prestacycle's good friend and associate – cycling engineer Tomo Ichikawa. It removes the quick-link, which is the only function you need. When quick links are installed, pedal pressure can lock the installed quick link without any tools. For regular chain service, we still recommend a quick link tool, but with our feature, you no longer need to carry a separate tool with you on the bike. Quick-link removal Instructions: Place the quick Link near the top of the crank Jump the chain forward one tooth so the quick-link stands-up Use the slot on the Prestalever to push down FIRMLY. (The crank tooth will support the other end from underneath.) T-handle Tubeless Tire Plugger (optional parts required – Available 12/15/2021) The center of the Prestalever has threads which accept our Tubeless tire plugger. It then forms a T-Handle for effective, centered pushing of the included "Bacon Strips" used to seal large cuts in Tubeless tires. Third-hand Tool for Hand Installation Certain tires have delicate beads. Tire manufacturers recommend hand-installation only. The Prestalever can be used as a "third-hand" tool. When you hand-install the bead in one direction, the tire starts lifting-out at the other end. Insert the lever at one end to hold the bead, then use BOTH hands to install the tire from the other end. Tubeless Tire Removal (or any Difficult Tire) The Prestalever is the #1 tool for removing difficult tires. Using two or three can help with the toughest tire and wheel combo's. Insert a lever, but do NOT flip it yet. The rim hook will hold the lever in place, but unlike traditional levers that hook onto spokes, the bead will NOT be tensioned. You can still fit-in more Prestalevers. Insert the levers spaced about 6 inches apart, then flip them all … one-at-a-time. Even the toughest tires will come right off the rim in seconds. Prestalever is different… designed from the start with real-world experience on bicycles. Specifications: - One-end: purpose-designed Tire Remover - The-other-end: purpose-designed Tire Installer - Presta Valve Core tool - Quick-link Chain breaker. - Threads make it a T-Handle Tubeless Tire plugger (plugging kit additional). - Use multiple levers for tough, delicate tires like Road Tubeless and Gumwall. - Dimensions: 100mm x 13mm x 12mm - Weight: 13 grams Disclaimer: Check with the manufacturer of your wheels and tires to verify application and fit. Some manufacturers specify hand installation and removal only. Always follow Manufacturer guidelines for tires and wheels.

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

- Designed to clean your bike frame and components while caring for delicate finishes - Tough impact resistant dual density handle that won’t slip in extreme conditions - Oversized head for fast cleaning of large areas - Rubberized impact zones for maximum protection

The Cyclone Chain Scrubber brushes are replaceable. The RBS-5 brush set includes the large side scrubbing brush, two roller brushes, and two wicking foam blocks.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") - The RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Metric and SAE readings up to 350 centimeters or 12 feet - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")

- Zyklop socket with 3/8 inch drive and holding function - "Take it easy" Tool Finder with color coding according to size

Because you love your bikes, when you’re not riding them you’re washing them, tuning them, or traveling to exquisite ride destinations. The Thru-Axle Chain Keeper is an ideal solution for keeping your bike chain secure during bike washing, tune-ups, and traveling. This elegant, lightweight, bio-based plastic design fits perfectly on the axles of 12mm thru-axle dropout systems, no tools required. By keeping chain tension with the Thru-Axle Chain Keeper, you can be confident your bike is safe during drivetrain cleaning or travel. Features: - Protects rear derailleur by maintaining chain tension when the rear wheel is removed. - Ideal bike service tool for washing, tune-ups, and traveling. - Accommodates road bikes, cyclocross bikes, mountain bikes, electric bikes, fitness bikes, and more. - Fits 12mm Thru-Axle dropouts. - Prevents the chain from slapping against delicate and painted frame surfaces. - High-density, solvent-resistant, Bio-based PA56 roller is easy on your chain, yet incredibly durable. - CNC machined aluminum body is corrosion-resistant and comfortable in-hand. - Tool-free, easy-install design makes use simple and effective for beginner or professional bike mechanics. - SAG Sustainability Action Group approved – bio-based material, low packaging volume, and mono-material for easy recycling.

Special tools for building Surly Fat Bike wheels. - 56mm-wide spacer aids in dishing and truing Moonlander offset wheels - 35mm-wide spacer aids in dishing and truing Pugsley offset wheels

The Surly Singleator Wrench is made from leftover stainless steel and serves two important functions: its 18mm wrench is perfect for adjusting the tension on your Singleator, and it opens bottles. Seriously. What a great way to reduce, reuse and recycle.