Parts & Accessories

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs

• 24-inch long double strap • Vinyl-coated hook ends

• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g

Elliptical rail for lower anchoring hook (incl. screws) and all models with QL2 including Classic Panniers from 2007+

Multifunctional two part mounting support for light, speedometer, or e-bike display. They can be fixed individually or in pairs with the Ultimate 6 mounting system. They are height adjustable and alignment can be adjusted up or down to create additional space on the bar.

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.

Plastic inserts for QL1 and QL 2 Tophooks. Each set has 2ea. 8mm & 11mm inserts. Each set is enough to set up one Ortlieb pannier.

If you've worn out your plastic inserts on the top hooks of your QL2.1-equipped Ortlieb bag, good job! That means you're using your gear a lot. To freshen up that sweet mounting system, here are new inserts for three different rack tube diameters. Each set has 2 inserts to fit each of: 8mm, 10mm, and 12mm racks rails. Each set is enough to set up one Ortlieb pannier for any of these diameters.

QL1 top hooks with handle, adjustable, Can accomadate 8mm, 11mm, and 16mm rack tubeing. For all Ortlieb panniers with QL1 systems (These hooks require a 3mm Allen key to install) -each set replaces top hooks on one pannier.

QL1 Top rail (5 holes) (pre-2007 models only)

- Replacement cable for the Ortlieb Ultimate 4,5 & 6 Mounting systems. - Works with standard Ultimate 4,5 & 6 mounts as well as the Extension adapter part E165. - 105cm (41 inches) long.

Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

- Expands up to 2x size to securely grip any shape - Weatherproof material will not deteriorate - Molded non scratch hooks

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

This Tubus dropout extension adapter allows you to mount racks further back on the frame. It also allows you to mount traditional racks on bikes with disc brakes. - Weight: 66g - NOTE: This item is not compatible with any “EVO” Tubus racks

LM-1 Fork Adapter for rigid forks* with a diameter from 20mm up to 32mm. For all Tubus Lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

Mudgard Bracket for Rear Carriers

QR Axle Adapter with a set of adapter plates and mounting parts for assembling a rear carrier to frames without eyelets.

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

Tubus strut clamp set for attaching and adjusting front stays on Cargo and Logo rear racks. - Aluminum block with stainless steel hardware - Fits 8mm diameter stays

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!